For MEP Engineering Firms
Dedicated MEP Specialists for US Mechanical, Electrical & Plumbing Firms
40% of AEC demand comes from MEP. Your firm has the contracts — add dedicated Revit MEP modelers, HVAC designers, and BIM coordinators in under a week. 50–60% less than US hires, same timezone, month-to-month.
The MEP Talent Crisis Is Costing You Revenue
MEP engineering represents the highest organic demand in the AEC sector. But the talent supply isn't keeping up — and your backlog is growing.
94%
unfilled positions
of AEC firms have unfilled engineering positions.
40%
of AEC demand
MEP is the single largest discipline segment in AEC outsourcing.
62%
BIM talent gap
of firms struggle specifically with BIM and digital documentation talent.
51%
turning down work
of firms declining projects due to staffing shortages.
How MEP Firms Use LatAm Scalers
Whether you're a 15-person MEP shop or a 200-person multi-office firm, these are the patterns we see most.
Backlog surge
You have the contracts but not the headcount. Add dedicated MEP production capacity in under a week — without the 3–6 month US hiring cycle.
Multi-trade coordination
BIM coordinators who run clash detection across M, E, and P trades in Navisworks and ACC — reducing field conflicts by 30–50%.
BIM mandate compliance
Clients requiring LOD 300–400 models? Our Revit MEP modelers produce coordinated deliverables under your PE direction.
Team burnout mitigation
Your PEs are doing production. Free them for engineering judgment and client work by offloading modeling and documentation.
MEP Roles We Place
Specialists across all three trades — plus cross-discipline BIM coordination. Every candidate is vetted for MEP-specific tool proficiency and US-code awareness.
Revit MEP Modeler
Ductwork layouts, piping systems, electrical conduit runs, and coordinated MEP models in Revit.
View role →
HVAC Designer
Load calculations (Manual J/D/S), equipment selection, duct sizing, and energy modeling.
View role →
Electrical Designer
Power distribution, lighting layouts, panel schedules, and NEC-compliant single-line diagrams.
View role →
Plumbing Designer
Domestic water, sanitary/waste, storm systems, medical gas, and riser diagrams.
View role →
BIM Coordinator
Multi-discipline clash detection, model audits, and coordination between MEP, structural, and architectural trades.
View role →
CAD Drafter
2D MEP documentation, detail sheets, and permit-set production in AutoCAD.
View role →
Tools Your MEP Specialist Will Use
We match tool proficiency to your firm's stack — Revit MEP, Navisworks, Trane Trace, and your preferred platforms.
Revit MEP
Full mechanical, electrical, and plumbing modeling, fabrication-level detailing, and construction documentation.
Navisworks
Multi-discipline clash detection, 4D scheduling, and coordination reports.
AutoCAD MEP
2D MEP layouts, detail sheets, and permit documentation.
ACC / BIM 360
Cloud-based model coordination, issue tracking, and document management.
Trane Trace / Carrier HAP
HVAC load calculations, energy modeling, and equipment sizing.
Bluebeam
Markup cycles, redlines, QTO, and document review workflows.
Your PEs Retain Authority. We Handle Production.
This is how responsibility works — your licensed engineers keep design authority and stamping, while your dedicated LATAM specialist handles modeling, documentation, and coordination.
| Your Licensed PE Team Retains | Your Dedicated LATAM Specialist Handles |
|---|---|
| Engineering design authority, calculations sign-off, PE stamping | Revit MEP modeling, system layouts, documentation production |
| BEP, LOD requirements, model element standards | Execution within your BEP, QA to your checklist |
| Redlines, markups, engineering direction | Iterative model updates, clash resolution, version control |
| Client communication, project management | Vetting, matching, onboarding, replacement guarantee |
Engagement Options for MEP Firms
Start with one specialist and scale as your backlog grows. Month-to-month, no long-term contracts.
Individual Specialist
Dedicated MEP Specialist
Full-time (40h/week) or part-time (20h/week) — a Revit MEP modeler, HVAC designer, or BIM coordinator embedded in your team and workflow.
From ~$3,500/mo
Learn more →
Production Pod
MEP Production Team
Multi-seat configurations — BIM coordinator + mechanical modeler + electrical designer — for firms managing multiple concurrent projects.
Custom pricing
Learn more →
Pricing Guidance
Individual MEP specialists start at approximately $3,500/month for full-time engagement — 50–60% less than comparable US MEP hires. Multi-seat pods are custom-quoted based on disciplines and volume.
See how pricing worksFrequently Asked Questions
Common questions from MEP engineering firms evaluating dedicated LATAM specialists.
What MEP disciplines do your specialists cover?
We place specialists across all three MEP trades — mechanical (HVAC), electrical, and plumbing — plus cross-discipline BIM coordinators. Whether you need a dedicated HVAC designer or a full MEP modeling team, we match to your specific discipline needs.
Do your specialists understand US codes like ASHRAE and NEC?
Yes. We screen for familiarity with ASHRAE standards, NEC, UPC/IPC, and NFPA codes. Our specialists produce code-aware drawings and calculations under the direction of your licensed Professional Engineers. All documents require PE review and stamping.
Can you support LOD 300–400 BIM deliverables?
Absolutely. Our Revit MEP modelers produce coordinated models at LOD 300–400 for design-bid-build and design-build projects. We align on your BEP, LOD matrix, and model element standards during onboarding.
How do you handle multi-trade coordination?
Our BIM coordinators run clash detection in Navisworks across MEP trades and against structural and architectural models. They generate coordination reports, track issues in ACC/BIM 360, and update models through resolution cycles — all under your project lead's direction.
What does pricing look like for MEP specialists?
Individual MEP specialists start at approximately $3,500/month for full-time (40h/week). Multi-seat and production pod configurations are custom-quoted. That's 50–60% less than comparable US MEP talent.
How fast can we get an MEP specialist started?
We typically present vetted MEP candidates within 48 hours. Once tool access and scope are confirmed, onboarding is designed to get production moving within the first week.
Ready to Scale Your MEP Production Capacity?
Book a call to discuss your MEP disciplines, tools, and project pipeline — or share your scope and we'll propose the best-fit engagement.
Month-to-month · Free replacement guarantee · No long-term contracts
Get in touch
Let's Talk MEP Talent
Tell us your MEP disciplines, tools, and project timeline — we'll match you with vetted specialists.
Get in Touch
Send us a message with your requirements, or book a quick scoping call — whatever works best for you.
Matched in under one week
Vetted shortlist in 48 hours
Month-to-month, no lock-in
Scale up or pause anytime
Free replacement guarantee
We fix the fit — at no cost
50–70% cost savings
<3% pass our vetting
Your request is in good hands.
Here's what happens next:
Confirmation & scoping
We'll reach out within a few hours to confirm receipt and clarify any details.
Vetted shortlist in 48h
We'll present 1–3 pre-vetted specialists matched to your tools, standards, and timeline.
Start within 1 week
Meet top matches for a fit check — or skip interviews and start immediately.
Want to speed things up?
Book a scoping call now and we can start matching during the call.